One of the standout benefits of the Angle-Iron Cutting Machine is its exceptional speed and efficiency. Equipped with advanced cutting mechanisms and powerful motors, this machine can swiftly and effortlessly cut through angle irons with precision. Gone are the days of manual labor and tedious cutting processes. With this machine, operators can significantly reduce cutting time, enhance productivity, and meet project deadlines more effectively.

Precision is another outstanding advantage of Angle cutting machine, Angle cutting machine using high-precision cutting and positioning system, can ensure cutting quality and dimensional accuracy.

Angle steel cutting machine adopts safety protection device and emergency stop function, which can effectively ensure the safety of the operator.

Generally there are automatic steel bar cutting machine, and semi-automatic steel bar cutting machine. The automatic electric cutting machine is also called the electric energy is converted into kinetic energy through the motor to control the cutting knife incision to achieve the effect of cutting steel bars. The semi-automatic is to manually control the incision, thus cutting the steel bar operation. And more should belong to the hydraulic steel bar cutting machine is divided into rechargeable and portable two categories.

1. Check before use: Before use, check whether the shell of the electric bending machine is damaged, whether the wire is worn or damaged, and whether the tool is sharp and firm.
2. Follow the safe operating procedures: When using electric bending machine, you need to follow the safe operating procedures, such as do not use in humid environment, do not use in flammable and explosive environment, do not install too long extension rod on the tool.
3. Wear protective equipment: When using electric bending, you need to wear protective equipment, such as gloves, goggles, etc., to avoid injury.
4. Pay attention to the operation posture: When using electric bending machine, you need to pay attention to the operation posture, such as do not put the hand in front of the tool, do not put the body too close to the tool, etc., to avoid injury.
5. Pay attention to the use of tools: In the use of electric bending machine, you need to pay attention to the use of tools, such as do not use too sharp tools, do not use damaged tools, etc., to avoid injury.
6. Pay attention to the use of the power cord: When using the electric bending machine, it is necessary to pay attention to the use of the power cord, such as do not wrap the power cord on the tool, do not pull the power cord too long, etc., to avoid damage to the power cord or electric shock.
7. Pay attention to cleaning and maintenance: After using the electric bending machine, it is necessary to clean and maintain the electric bending machine in time, such as cleaning the debris on the tool, lubricating the tool, etc., to extend the service life of the electric bending machine.
8. Pay attention to storage: When the electric bending machine is not used, it should be stored in a dry, ventilated and non-corrosive place to avoid moisture or damage.

1. Keep the cutting machine clean: After use, the dust and debris on the cutting machine should be cleaned in time to avoid the cutting machine rust or jamming.
2. Check the tool: regularly check the wear of the tool, if the tool wear is serious, it should be replaced in time.
3. Check hydraulic oil: regularly check the oil level and oil quality of hydraulic oil, if the oil level is too low or the oil quality deteriorates, the hydraulic oil should be added or replaced in time.
4. Check the circuit: regularly check the circuit of the cutting machine to ensure that the circuit is well connected without short circuit or open circuit phenomenon.
5. Regular lubrication: Regularly lubricate the moving parts of the cutting machine to reduce friction and wear.
6. Storage: When not in use, the cutting machine should be stored in a dry, ventilated and non-corrosive place to avoid moisture or damage.

Safety Precautions:
Wear appropriate personal protective equipment, including safety glasses and gloves.
Ensure that the work area is clear of obstacles and that you have a stable and level surface.

Select the Correct Rebar Bender:
Choose a rebar bender that suits the size and type of rebar you are working with.

Mark the Bending Point:
Use a marker or chalk to mark the point on the rebar where you want the bend to occur. Measure and mark accurately to ensure precision.

Secure the Rebar:
Place the rebar securely into the bending machine, ensuring that it is properly aligned with the bending point.

Adjust the Bending Angle:
Set the bending angle on the rebar bender to the desired angle for your specific construction requirements. This is usually done using adjustment knobs or levers on the machine.

Operate the Rebar Bender:
Depending on the type of rebar bender, you may need to manually operate a lever or turn a crank to bend the rebar.

Check the Bend:
After bending, check the angle and shape of the bend against your specifications. If adjustments are needed, repeat the bending process.
Repeat as Needed:

If multiple bends are required, repeat the process, adjusting the bender as necessary for each bend.

Remove the Rebar:
Once you have achieved the desired bends, carefully remove the rebar from the bender.

Hydraulic pump: responsible for converting low pressure oil into high pressure oil.
Hydraulic cylinder: Stores and amplifies the pressure of hydraulic oil for pushing punches or plungers.
Punch: Usually a metal block with a cutting edge that is used to cut or push out a hole during punching.

When working, the hydraulic pump will suck the hydraulic oil and control it through hydraulic components such as pressure regulating valves and direction valves, and introduce it into the hydraulic cylinder. As the oil advances, the plunger inside the hydraulic cylinder is pushed, further pushing the punch to put pressure on the material to be processed. When the set pressure is reached, the control air valve is activated, releasing compressed air, which strikes the oil in the working cylinder at a very high speed, forming a strong shear force, and quickly completing punching or other forms of processing tasks

The first is his effectiveness：The hand-held steel bar cutting machine has the characteristics of fast and efficient, and can quickly cut various specifications of steel bars, which greatly improves the work efficiency.

The second is his versatility：This machine can rotate the head at any Angle, adapt to different angles of cutting, with high flexibility.

The third and most remarkable thing is that the machine is very easy to operate：Although the handheld steel bar cutting machine is small, it has a strong cutting ability and can cut the steel bar quickly, cutting faster than other equipment.

In general, the hand-held steel cutting machine with its high efficiency, multi-functional, easy to operate, powerful cutting ability and other characteristics, greatly improve the work efficiency and quality, is the ideal tool for the construction industry.