maintain – Rebar cutter tools https://rebarcuttertool.com Hydraulic Power tool Tue, 20 Feb 2024 13:44:46 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.1 https://rebarcuttertool.com/wp-content/uploads/2024/02/cropped-IMG_8982-32x32.jpg maintain – Rebar cutter tools https://rebarcuttertool.com 32 32 How to protect and maintain a portable Angle cutting machine https://rebarcuttertool.com/2024/02/20/how-to-protect-and-maintain-a-portable-angle-cutting-machine/ https://rebarcuttertool.com/2024/02/20/how-to-protect-and-maintain-a-portable-angle-cutting-machine/#respond Tue, 20 Feb 2024 13:44:46 +0000 https://rebarcuttertool.com/?p=4780 Maintenance and maintenance of the portable Angle cutting machine can extend the service life of the equipment, improve the cutting effect, and ensure the safety of operation. Here are some care and maintenance suggestions:

  1. Keep the cutting machine clean: After use, the dust and debris on the cutting machine should be cleaned in time to avoid the cutting machine rust or jamming.
  2. Check the tool: regularly check the wear of the tool, if the tool wear is serious, it should be replaced in time.
  3. Check hydraulic oil: regularly check the oil level and oil quality of hydraulic oil, if the oil level is too low or the oil quality deteriorates, the hydraulic oil should be added or replaced in time.
  4. Check the circuit: regularly check the circuit of the cutting machine to ensure that the circuit is well connected without short circuit or open circuit phenomenon.
  5. Regular lubrication: Regularly lubricate the moving parts of the cutting machine to reduce friction and wear.
  6. Storage: When not in use, the cutting machine should be stored in a dry, ventilated and non-corrosive place to avoid moisture or damage.
]]> https://rebarcuttertool.com/2024/02/20/how-to-protect-and-maintain-a-portable-angle-cutting-machine/feed/ 0